PM VSD Screw Air Compressor

Euroair Compressor offers you the powerful combination of reliability, flexibility, and low operating costs to drive your production efficiency. Supported by German Technology Air-end and Electric Motor with Protection Grade IP55 IE3 which offer lots of benefits and also can guide the compressor to work safely. Using high-quality components from well-known European brands, we guarantee that it will lower your maintenance cost because the component we use have long service life so it will reduce the replacement time. Our compressors are also available in a wide range of working pressure and capacity so you can choose the suitable one for your needs. To get to know more about the products, check the product’s specifications and features below.

Request A Quote
Brochure PM VSD Compressor

Power

7.5 - 280 ( kW )

Volume Flow

0.7 - 49.5 (m3/min)

Working Pressure

0.8 - 1.3 (mpa)

Adopts industry-leading screw ai endm high efficiency and low rotating speed. with the third generation tooth type of rotor, cutting-edge geometric design-stable, reliablem energy saving and long service life

Adopts direct connection structure without any loss, transmission-efficiency is 100% maintenance cost is low, disassemble is onvinient, greatly save the downtime. Easy Maintenance – Airend maintenance only need to disassemble motor, do not affect each other

Adopts intelligent control system to ensure fully automated intelligent operation, detect exhaust pressure, temperature and other field data, and control the exhaust pressure within the preset pressure range throught the intake valve, so as to output stable pressure.

Adpots unique low-speed motor, protection grade IP55 IE3, insulation grade F, suitable for bad working conditions. High balance precision, high speed running smoothly.

Adopts advanced design, harmonica radiator, effectively increase the heat dissipation area, run faster and smoother, and take away the heat of the machine in time. The heat exchange effect of the same area is 30% higher than that of the traditional cooler. Even in region with high temperature and high humidity, the normal operation of unit can be guaranteed

Feature And Advantages

EUROAIR PM VSD Air Compressor

Integrated Shaft Structure

High-efficiency permanent magnet motor and screw positive rotor adopt built-in integrated shaft direct connecton structure, transmission efficiency 100%, no gearbox, no belt, no transmission efficieny loss.

Top Quality

The use of top-quality imported bearings and the latest research and development of rotor profile, large rotor, large displacement, low speed, low noise

Steady Pressure

PID ( Propotional, Differential, Intergal ) method is used to accurately adjust the exclusive compressor to maintain the stability of the system pressure

Cost Reducing

The energy cost of permanent magnet frequency conversion technology is reduced by more than 35%, and the life cycle cost of compressors can be reduced by an average of 22%. The extra cost of the compressor can be recoverd within 1 to 2 years.

High Efficiency and Energy Saving

Frequency conversion regulation can reduce the actual power consumption of frequency conversion compressor in the same proportion, and the energy can be effectively applied to air compreesion.

Life Extension

Frequency conversion starts to reduce the impac of meta-collection on the power grid and machinery and prolong the service life.

Technical Parameter

EUROAIR PM VSD Air Compressor

       Technical Parameters of Single-stage Permanent Magnet Variable Frequency Screw Air Compressor       
Model Power
( kW )		 Pressure
(Mpa)		 Volume Flow
(m3/min)		 Pipa
Diameter		 Weight (kg) Dimension (mm)
EKAPM-10A
 7.5
 0.8 1.1 G1/2 180 700x600x860
1.0 0.9
1.3 0.7
EKAPM-15A 11 0.8 1.7 G3/4 320 1000x750x1070
1.0 1.6
1.3 1.0
EKAPM-20A 15 0.8 2.3 G3/4 320 1000x750x1070
1.0 2.1
1.3 1.7
EKAPM-30A 22 0.8 3.4 G1 420 1100x850x1110
1.0 3.2
1.3 2.5
EKAPM-40A 30 0.8 4.7 G1 450 1100x850x1110
1.0 4.0
1.3 3.1
EKAPM-50A 37 0.8 6.4 G1 1/2 600 1200x1000x1350
1.0 5.2
1.3 4.7
EKAPM-60A 45 0.8 7.3 G1 1/2 700 1200x1000x1350
1.0 6.6
1.3 5.5
EKAPM-75A(W) 55 0.8 9.4 G2 1/2(A)
DN50(W)		 850(A)
1300(W)		 1500x1200x1550(A)
2100x1400x1650(W)
1.0 7.2
1.3 6.2
EKAPM-100A(W) 75 0.8 12.3 G 1/2(A)
DN50(W)		 950(A)
1500(W)		 1500x1200x1550(A)
2100x1400x1650(W)
1.0 10.8
1.3 9.1
EKAPM-125A(W) 90 0.8 15.2 G2 1/2(A)
DN50(W)		 1650 2100x1400x1650
1.0 12.3
1.3 11.4
EKAPM-150A(W) 110 0.8 19.9 DN65(A)
DN80(W)		 2300(A)
2700(W)		 2250x1510x1850(A)
2550x1680x1850(W)
1.0 16.3
1.3 14.5
EKAPM-180A(W) 132 0.8 23.0 DN65(A)
DN80(W)		 2500(A)
2800(W)		 2250x1510x1850(A)
2550x1680x1850(W)
1.0 19.7
1.3 16.0
EKAPM-220A(W) 160 0.8 28.5 DN100 4000(A)
3200(W)		 3250x2100x2200(A)
3000x2000x2000(W)
1.0 22.8
1.3 21.5
EKAPM-250A(W) 185 0.8 30.0 DN100 4200(A)
3600(W)		 3250x2100x2200(A)
3000x2000x2000(W)
1.0 27.0
1.3 23.0
EKAPM-270A(W) 200 0.8 32.5 DN125 5300(A)
5000(W)		 3550x2300x2300(A)
3600x2200x2200(W)
1.0 29.2
1.3 25.5
EKAPM-300A(W) 220 0.8 38.0 DN125 5800(A)
5500(W)		 3550x2300x2300(A)
3600x2200x2200(W)
1.0 33.0
1.3 28.8
EKAPM-350A(W) 250 0.8 44.0 DN125 6300(A)
6000(W)		 3760x2260x2200(A)
3600x2200x2200(W)
1.0 41.0
1.3 31.5
EKAPM-380A(W) 280 0.8 49.5 DN125 7000(A)
6500(W)		 3760x2260x2200(A)
3600x2200x2200(W)
1.0 43.0
1.3 40.0

Industry Application

EUROAIR Centrifugal Compressor Solutions

LASER CUTTING

CHEMICAL

PHARMACEUTICAL

RUBBER & PLASTIC

textile

FOOD & BEVERAGE

MINING & GEOTHERMAL DRILLING

GLASS