HDR SERIES REFRIGERATED AIR DRYER (HDR-50HP)

The conditions of the qualified drying system

  • Purge System Selection should be based on rated pressure of air compressor.
  • Air Dryer’s Model Selection should be based air inlet temperature, rated air flow, rated pressure and ambient temperature.
  • Air Dryer’s Type Selection should be based on the dryness, which relate to the discretion of dew pont.
  • Quantities of stages of air filters and type selection should be based on the discretion of oil content index and dustiness index.
  • Pipes configuration and materials of pipes’ confirmation should be base on dew point, oil content and business index.
  • Install the self-cleaning filter to protect the air compressor, assurace the purigying effect while working in the environment with large amount of dust.
  • Compressed air purifying process is the process of drying and filtering, meanwhile it is also a process of temperatur decreasing. Temperatur takes a key role during the process of
  • purifying as inlet temperature and ambient temperarture directly impact the effect of drying and purifying
  • Air receiver tank also is an important part of a whole compressed air system. Air receiver tank should be installed between air commpressor and air dryer, air dryer and air
  • consumption location because air receiver tank has the effect of stabilizing air, cooling, dirty drain and air storage.
  • System should add the waste oil collector, collecting the oil then drain out the water which reach environment requirement to the river.

Datasheet

Download File

Contact

0 People watching this product now!

check-1.png

The cost will be increased because of the bad quality compressed air

If acidic sludge entering air line, the caused problem will come soon. Below are some common problems:

  • Damage of pneumatic tools and equipment more frequently, life reduction.
  • Finished production and other materials that will expose to air will be damaged or quality reduction
  • Corroded air line will result in air leaking, wasting of compressed air and energy.
  • In fact, a leak with thickness 3 mm will cause 3.7 kW energy consumption, which means there will be extra energy cost every year.
check-1.png

The solution of the power consumption

  • Air dryer is a durable and low energy consumed air solution.
  • Drying process on compressed air is needed in order to prevent the condensed water precipitation and the followed corrosion and equipment damage. Sunfilter series air dry can remove the water from the compressed air, which remove the biggest damage on air pipe system.
  • More filter, complete the installation of equipment.
  • More filter in the compressed air system will further improve the quality of air, reducing the possibility of damage of pneumatic tools and equipment, enhance the quality of finished production.
check-1.png

The damage of the unprocessed compressed air

Compressed air is an important driving force which is widely used in various industrial fields. After the air around us is compressed, a sharp rise in the number of water vapor and dust contained in unit volume.

Meanwhile the water vapor and oil mist condense liquid drops during compressing process, then mixing with dusts in high concentration, forming mostly acidic sludge.

If there is no air after treatment equipment, these acidic sludge will enter the air line, corrode pipeline material, destroy pneumatic tools, equipment, and ultimately resulting in lower-quality product, production stagnated, costs rising, health and safety at risk.

Model Capacity Nm3/Min Nominal Power Kw Power Supply V/Ph/Hz Air Connections Dimension (mm) Weight Kg
L W H
HDR-10HP 1.2 0.85 220/1/50 Rc1″ 630 450 640 50
HDR-20HP 2.4 1 220/1/50 Rc1″ 700 450 830 80
HDR-30HP 3.8 1.25 220/1/50 Rc1.5″ 850 500 920 105
HDR-50HP 6.4 1.5 220/1/50 Rc1.5″ 880 550 1020 150
HDR-60HP 8 1.8 220/1/50 Rc1.5″ 880 550 1020 160
HDR-75HP 10.5 2.5 380/3/50 Rc2″ 1180 670 1080 240
HDR-100HP 13.5 2.5 380/3/50 Rc2″ 1180 670 1080 260
HDR-125HP 18 3 380/3/50 DN65 1360 710 1220 310
HDR-150HP 25 4 380/3/50 DN80 1360 710 1220 400
HDR-200HP 28 4.5 380/3/50 DN80 1650 750 1290 450
HDR-300HP 35 6.5 380/3/50 DN100 1670 750 1575 780
HDR-350HP 45 8.8 380/3/50 DN100 2000 950 1740 820
HDR-400HP 55 10.2 380/3/50 DN125 2350 1050 1910 900
HDR-450HP 65 13 380/3/50 DN125 2550 1100 1940 1100